How to Hide the IR Illuminator Glow for a Security Camera

Techwalla may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

A security camera often has a lit infrared LED on the front to indicate that it is functioning. While noticing the security camera can be an added deterrent to any intruder, you can render the IR LED's "glow" invisible should you not wish to call attention to the camera. Making the glow invisible to the naked eye requires a few supplies that can acquired from a hardware store or hobby shop if not already on hand.

Advertisement

Step 1

Tear off a strip of gray duct tape that is slightly longer than the panel that houses the IR LED. Place the duct tape directly over the panel on the security camera and press down with your fingers. Place a second piece of duct tape, identical to the first, over the panel. The density of the duct tape will prevent the glow from the IR LED from being seen.

Advertisement

Video of the Day

Step 2

Cut a square from the infrared "blocking" filter, also known as a cutoff filter, that is slightly larger than the IR panel on the front of the security camera. Tape the cu out piece of filter to the panel with strips of duct tape or masking tape. The glow from the IR LED will no longer be visible to the eye since the light wavelengths are now being blocked by the filter.

Advertisement

Advertisement

Step 3

Cut a piece of black construction paper that is slightly larger than the IR panel on the front of the security camera. Place the cut piece of construction paper on top of the panel so that the panel is covered. Tape the construction paper to the security camera's front with strips of masking tape to hide the illumination from the IR LED.

Video of the Day

Advertisement

Advertisement

references & resources

Report an Issue

screenshot of the current page

Screenshot loading...