A chimney damper is a piece of removable metal installed in a fireplace chimney. The damper keeps the chimney closed when not in use so heat or air conditioned air does not escape up the chimney. The damper also keeps animals out of the fireplace. Homeowners should regularly clean the damper during routine fireplace and chimney cleaning. To properly clean the damper, you must remove it from the fireplace.
Things You'll Need
- Handheld broom and dustpan
- Wire brush
- Gallon bucket
- 6 tbsp. tri-sodium phosphate (TSP) cleaner
- 1 cup bleach
- 1 gallon warm water
- Clean towel
Sweep out the fireplace with a small, handheld broom. Sweep up the ashes and throw them away.
Line the floor of the fireplace with old newspapers. This will catch the ashes or soot that falls when you remove the damper.
Remove the chimney damper plate. The process will vary depending on how your damper is installed. Most dampers connect to their supports with screws or cotter pins. Slowly pull the damper out of the chimney. Dump any ashes on the plate in the trash.
Hold the damper over the newspapers and scrape it with a wire brush to remove the large chunks of soot.
Fill a gallon bucket with 6 tbsp. of TSP cleaner, 1 cup of bleach and 1 gallon of warm water. Dip the scrub brush in the mixture and gently scrub the front and back of the damper to remove all the soot. Rinse the damper with clean water. Dry it with a clean towel and replace it back in the chimney.
Remove the newspapers and throw them away, then vacuum the fireplace with a shop vacuum to remove any remaining soot or ashes.
- Photo Credit Ryan McVay/Lifesize/Getty Images
How to Clean Chimney Flue
The chimney carries smoke and fumes from your fireplace or wood stove. In time, the walls of your chimney flue coat with...
How do I Fix a Damper That is Not Opening?
If you have a fireplace or a wood burning stove in your home, then you most likely have a chimney with a...
How Do You Open a Fireplace Damper?
Opening a fireplace damper depends on the model of the fireplace, but generally there is a lever that slides back and forth...