How to Cut ABS Pipe

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
You can cut through previously installed ABS pipe with a handsaw.

ABS (Acrylonitrile Butadiene Styrene) is a hard, black, plastic pipe that is installed in homes for both sewer and vent lines. It serves all types of water fixtures and comes in diameters ranging from 1 1/2 to 4 inches. Sections of ABS pipe join together with ABS couplings and ABS cement. The type of tool used to cut ABS depends on whether the pipe has been installed already or if it is yet to be installed into the sewer line.

Advertisement

Previously Installed ABS Pipe

Video of the Day

Step 1

Mark the ABS pipe at the place where it needs to be cut, using a pencil. Rest the blade of a handsaw on the mark with a thumb on one side of the saw to help guide the blade.

Video of the Day

Step 2

Move the saw slowly backward and forward across the pipe. When the blade starts cutting into the pipe, remove your thumb. Make a straight perpendicular cut right through the pipe.

Advertisement

Step 3

File away all plastic fragments or burrs from the cut pipe end, using a utility knife or fine sandpaper.

Yet-to-Be Installed ABS Pipe

Step 1

Mark the cutting point on the new section of ABS pipe. Adjust the miter saw's locking handle to 90 degrees and turn it clockwise to tighten it in position.

Advertisement

Step 2

Place the ABS pipe horizontally on the miter saw's base and against the back stop. Position the mark on the pipe with the circular saw blade. Hold the pipe firmly with one hand (12 inches or more from the blade) and squeeze the saw's trigger to turn it on. Pull the saw's handle down to cut fully through the pipe.

Step 3

Lift up the handle and remove the cut pipe. Cut off any burrs from the pipe with the utility knife.

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...