How to Pull a Fence Tight

Save

Whether you are building a new fence or repairing an old one, having the fence properly stretched is vital to keeping your animals on your property. If you are repairing an older fence, the task is simple. Loosen wire from the posts where the wire needs tightening. Attach fence tighteners and twist them with a pair of pliers to pull the wire tight again. Reattach the wire to the posts. For new fences, you need to use a fence stretcher tool or a come-along tool to tighten the new wire before you attach it to the posts.

Things You'll Need

  • Pliers
  • Fencing tool
  • Hammer
  • Fencing staples
  • Come-along tool
  • Fence stretcher tool
  • Wire fasteners
  • Attach one end of the fencing wire to one of the corner posts. If you are using woven wire, remove enough vertical wires from the woven wire so you just have horizontal wires. Wrap each horizontal wire around the post. Twist the end of the wire around its mate on the woven portion of the fencing wire using a pair of pliers or a fencing tool.

  • Connect the fencing material to the brace post with fencing staples. Unroll the wire to the end of the fence row. Cut off the vertical wires as you did in the first step and wrap the wires loosely around the corner post. Do not use staples at this time.

  • Attach the fence stretcher or come along to the wire. Brace the fence stretcher or come along against the brace post. Use the ratcheting mechanism to gradually pull the fence material tight. As you tighten the wire, have a helper walk the fence line to ensure the wire stays at the proper height above the ground.

  • Use staples to connect the woven wire to the all of the wooden fence posts except the corner post. If you are using steel fence posts, attach wire fasteners with a pair of pliers.

  • Release the pressure on the fence stretcher or come along. Pull the fence tight by hand between the brace post and the corner post. Wrap the horizontal wires tightly around the corner post and fasten them to their matching wire by wrapping the end around the wire several times.

Tips & Warnings

  • If you are using barbed wire, start with the top wire and work your way down the posts. Complete each wire's installation before proceeding to the next.
  • If you don't have a fence stretcher or come along tool, you can make a woven wire fence stretcher out a pair of old 2-by-4-inch lumber pieces. Sandwich the wire between the boards and use bolts to hold the boards together. Attach the board to a log chain. Tie the chain to your tractor. Use the tractor to pull the wire tight.
  • Use leather gloves when working with fencing wire.

Related Searches

References

  • Photo Credit Hemera Technologies/AbleStock.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Splice a Wire Fence

    Splicing a broken wire in your fence may look like a difficult job and leave you wondering how to get the tension...

  • How to Pull a Fence Wire

    The secret to building a wire fence is tension. Regardless of the type of wire you use for your fencing, removing the...

  • How to Pull a Chain Link Fence Tight

    To do its job properly, the chain fabric of a chain-link fence needs to be pulled taut between its supporting fence posts....

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!