Laminate wood grain furniture is a furniture type consisting of a pressed wood core covered by a laminate veneer. Once glued in place the laminate can last decades. In that time, normal wear and tear can begin to create scratches in the laminate's surface resulting in furniture that appears old and dirty regardless of overall condition. Rather than replace the furniture, you can restore its appearance. With an application of wax and laminate filler, you can blend the scratches back into the laminate. Blended, the surface can look nearly new, adding years of use for the piece.
Things You'll Need
- Mild liquid cleanser
- Clean lint-free cloth
- Furniture paste wax
- Buffing cloth
- Laminate repair filler
- Wooden stirring stick
- Putty knife
- Steel wool
- Non-wax furniture polish
Clean the surface of the veneer using a damp cloth containing a mild cleanser diluted with warm water according to manufacturer's instructions to remove any dirt or fingerprints from the furniture. Wipe with the grain while cleaning, and then wipe the surface dry with a clean lint-free cloth.
Fill small shallow scratches that aren't deeper than the top grained layer of the laminate with furniture paste wax. Place a quarter-sized circle of the wax onto a piece of cloth and rub the wax into the scratches in the laminate. Fill the scratches with the wax to the surface level of the veneer.
Buff the laminate surface with a buffing cloth using small circles that concentrate primarily over the waxed area. Blend the wax into the laminate to conceal the scratches, applying more wax if needed to fill the scratched completely.
Fill deeper scratches in the furniture by packing them with laminate repair filler. Use a filler matched to the color of the laminate, mixing several filler colors if necessary to match the furniture. Mix the filler by adding a lighter color filler to a darker one, using a wooden stirring stick to combine them. Pack the scratch with a putty knife, pressing firmly with the flat of the knife to fill the scratch until level with the furniture surface. Wait 24 hours for the filler to harden.
Buff the filler patches with steel wool using small circles to smooth and level the filler with the furniture surface.
Spray a light layer of non-wax furniture polish over the furniture and wipe the surface with a clean cloth to help blend the patches in with the rest of the laminate.
Tips & Warnings
- While you can repair the Formica and keep the repaired scratches from further damage, the only way to completely restore your countertop is to replace the surface entirely.
How to Fix Scratches on a Laminate Wood Table
Laminate wood tables provide the look you want without the expensive price you do not want. These tabletops scratch easily, however, which...
How to Repair Scratched Formica
Formica is composite material, a plastic laminate that’s both heat- and stain-resistant. It can be found on kitchen and bathroom countertops throughout...
How to Fix a Scratch on a Sauder
Sauder ready-to-assemble pre-fabricated furniture is made of compressed particleboard with a thin laminate exterior finish. Surface scratches in the laminate or deep...
- How to Finish Pressed Wood
How to Repair Scratches on Particle Board Furniture
Particle board is a laminate of pressed wood shavings and chips that approximates a real piece of wood and is an excellent...