How to Install a Billet Grille on a 2002 Avalanche
When it comes to installing an after-market, custom billet grille on your 2002 Avalanche, the difficulty will depend on the type of grille you choose to install. Some billet grilles can be installed directly over the existing grille, which is quick and easy but the stock grille will still be seen through the billet. Performing a full replacement takes more time and care with results that are more professional-looking.
Other People Are Reading
Things You'll Need
- Phillips-head screwdriver
- Flat-head screwdriver
- Billet grille
- Installation kit provided with grille
Instructions
-
Grille Overlay
-
1
Remove the plasic pins or screws from the factory plastic cover located between the grille and the radiator, using a flat-head screwdriver.
-
2
Place the billet grille over the stock grille. Center the grille in preparation for securing it to the mounts.
-
-
3
Using the tool and mounting parts in the installation kit, loosely secure the billet to the mounting brackets with the bolts provided.
-
4
Ensure the grille is aligned properly after the brackets are in place, then tighten the bolts. Do not over-tighten the bolts as this could crack the grille.
Grille Replacement
-
5
Remove the plasic pins or screws from the factory plastic cover located between the grille and the radiator, using a flat-head screwdriver.
-
6
Remove the stock grille by popping the fasteners free. You will not need tools for this. Removal can be done with careful but firm pulling.
-
7
Place the new billet grille onto the frame and align it as accurately as possible.
-
8
Secure the billet loosely to the vehicle's frame with the bolts or pins provided in the installation kit.
-
9
Ensure the billet is aligned properly in the frame and tighten the bolts or secure the pins. Do not over-tighten the bolts, which could cause the billet grille to crack or warp.
-
1
Tips & Warnings
It may be necessary to remove the headlights and turn signals to provide more room to complete the replacement process.
Choose the process that best suits you and make sure you are order the correct billet grille.
