How to Install an Energizer Hard Case Work Battery

Energizer Hard Case work batteries are used in Energizer flashlights.

The Energizer Hard Case work battery refers to Energizer's series of battery-operated flashlights. The flashlight is designed for workers who require heavy-duty lighting in a portable and compact container. It consists of light emitting diode (LED) light technology and shatter-proof lens, making it ideal for even the toughest lighting situations. The flashlight body is made with ABS plastic, with steel plates on the side of the lens and a rubber casing that protects against shock.The flashlight takes AA alkaline Energizer batteries and can easily be installed, or assembled in a few quick steps.

Things You'll Need

• Phillips Screwdriver
• AA batteries

Instructions

1. Remove the Energizer Hard Case professional work battery flashlight from the casing. It comes with the flashlight and the batteries.

2. Unscrew the bottom end of the flashlight with a Phillips screwdriver.

3. Remove the bottom cover and insert the two AA batteries. Make sure the positive end of the battery is placed in the positive receptacle, and the negative end of the battery is inserted into the negative receptacle. The battery ends will be designated as either negative or positive.

4. Place the cover back on the battery and screw it in with the screwdriver until it is firmly in place.

References

• Energizer: Product Data Sheet
• Energizer: Energizer Hard Case Professional Flashlights
• Energizer: Energizer 101