A bustle allows you to pin up the train of a wedding dress to pick the train up off the floor. The two primary types of bustles for a wedding dress are the over bustle and the under bustle. For a wedding dress with an overlay, you can choose either type of bustle, but an under bustle allows you to add the buttons and loops to the inside of the dress, so it does not damage or disturb the overlay material, which may be tulle, organza or another material.
Things You'll Need
- Fitted wedding dress
- Straight pins
- Sewing machine
- Fabric-covered button(s)
- Matching fabric loop(s)
- Sewing machine or needle and thread
- Measuring tape
Turn the wedding dress inside out. Place the dress on a flat surface and spread the gown out so that everything is lying flat, including the train or skirt of the dress.
Measure to find the halfway point between where the train on the dress begins and the tail where it ends. Mark this area with a pin, and pin one of the bustle loops to the dress. For long trains, you should also measure the halfway point between where the train begins and the midway point you just marked with a pin. Place a pin and a bustle loop here as well. You should also measure the halfway point between the center pin and the tail of the dress and add a pin and bustle loop there.
Identify points on a higher area of the dress where you can attach the train at the points you have pinned to bustle the dress. According to Sewing.org, the higher points may be on the skirt of the wedding dress or near the back part of the waist. Pin a fabric-covered button at each point.
Turn the dress right side out, try it on and have someone bustle the dress for you. Have them arrange and rearrange the overlay fabric so that it looks right. If adjustments are needed, mark the areas where additional bustles should be added or if existing ones need to be moved. The best way to find the bustle points on a wedding dress, according to Sewing.org, is trial and error.
Turn the dress inside out again and sew the buttons on the inner part of the dress higher on the skirt or the waistline of the dress. Sew a coordinating loop for each button on the underside train of the dress.
Tips & Warnings
- If you want to create an over bustle, follow the same directions. But this time, you do not need to turn the dress inside out because you sew the buttons and loops on the outside of the dress.
- Photo Credit wedding dress image by araraadt from Fotolia.com
- How to Make a Wedding Dress Bustle
How to Add a Hook for a Wedding Gown Train
Your gown is a beautiful, memorable part of a wedding ceremony. However, the threat of stains can make wearing that beautiful gown...
How to Iron an Organza Wedding Dress
Organza is a popular fabric for wedding dresses, whether it is the primary material or makes up sections of the wedding gown....
How to Bustle a Mermaid Dress
A mermaid wedding dress has a fitted skirt that flares out at the bottom. Typically, a mermaid-style wedding dress has a relatively...
Types of Bustles on Wedding Gowns
Wedding gowns often include bustles, especially if the wedding gown has a long train. Brides use the bustle to hold the train...