How to Replace the Door Handle on a Kenmore Elite HE3 Dryer

Save

The Kenmore Elite HE3 dryer is a front-loading dryer, intended for residential use. The dryer has plastic door with a window on the front, allowing you to see inside the dryer. The door is opened by a plastic handle on the side of the door. Because the handle is constantly pulled when opening the dryer, the plastic may break or crack. If the handle breaks or cracks it should be replaced, as it may become difficult to open and close the dryer.

Things You'll Need

  • Screwdriver
  • Open the dryer door, then remove the door by removing the two screws that secure the door to the door jamb.

  • Place the door face down with the inside of the door facing up.

  • Remove the six screws from the inside portion of the door that secure the inner assembly to the outer assembly.

  • Separate the inner and outer frame, and remove the glass by simply lifting it out.

  • Remove the two screws securing the old door handle, then remove the handle.

  • Align the new door handle, then secure it with the screws that you removed from the old door handle.

  • Replace the glass, then reconnect the inner frame to the outer frame using the six screws that were removed.

  • Reinstall the door on the dryer by aligning the door hinge with the screws on the door jamb, then installing the screws.

Related Searches

References

  • Photo Credit BananaStock/BananaStock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!