How to Make a Marshmallow Shooter Out of PVC

How to Make a Marshmallow Shooter Out of PVC thumbnail
With the right pieces of PVC pipe, you can make a marshmallow shooter.

Marshmallow shooters are available in many stores and gift shops, but building a marshmallow shooter is a fun, easy and inexpensive project. Marshmallow shooters are fun and safe for kids of all ages and can provide hours of entertainment. Building a homemade marshmallow shooter is the perfect family project that kids will love building.

Things You'll Need

  • Hacksaw
  • Vise
  • PVC Glue
  • Sandpaper
  • PVC Pipe (2 feet of 1/2-inch pipe)
  • PVC Elbows (2)
  • Three Way Junctions (2)
  • End Caps (2)
Show More

Instructions

  1. Building the Shooter

    • 1

      Cut the first piece of PVC pipe seven inches long. Cut five pieces of PVC pipe to three inches in length. A hacksaw and a vise will be very handy for this procedure.

    • 2

      Lay out your shooter in the following manner. From right to left: Lay the 7-inch piece of PVC pipe horizontally. Directly in front of that place a three-way junction. Below the three-way junction, place a 3-inch piece of pipe vertically. Below the 3-inch piece of pipe, place an end cap. In front of the three-way junction, lay out another 3-inch piece of PVC. In front of that goes another three-way junction. Above that three-way junction, place a 3-inch piece of PVC pipe vertically with an elbow above it. To the left of the three-way junction, lay out another 3-inch piece of PVC with an elbow directly in front of it. Below the elbow is a vertical 3-inch piece of PVC followed by another end cap.

    • 3

      Put all pieces together. PVC glue may be used if desired. Gluing the pieces together, however, will make it more difficult for cleaning.

    • 4

      Test the marshmallow shooter by placing a mini marshmallow in the top piece of the shooter. Blow air through the shooter and the marshmallow will shoot out of the barrel.

Tips & Warnings

  • Increase air pressure in the marshmallow shooter by filling in areas of the gun that the marshmallow does not pass through with toilet paper.

  • Because a marshmallow shooter launches projectiles, the use of safety goggles is recommended.

Related Searches:

References

Comments

You May Also Like

Related Ads

Featured