Garden fountains made with old water pumps add character to your landscape. An old water pump can enhance a rustic or country style garden décor, whether the water flows into an old barrel, an old bucket or into a hand-painted ceramic flower pot. Select a basin for your garden fountain that best coordinates with your surrounding style; as long as the container is watertight and the right size, your garden fountain can flow continuously. Look for old water pump heads at local architectural salvage yards and from online auctions.
Things You'll Need
- 12-inch diameter or larger garden pail
- Silicone sealant
- 3-foot long rebar
- Copper pipe
- Measuring tape
- Pipe cutter
- 5/8-inch metal drill bit
- Copper fitting
- Propane torch
- Old water pump
- Flexible plastic tubing
- Submersible fountain pump
- Duct tape
Check a 12-inch or larger diameter garden pail for leaks. Seal any cracks with silicone sealant and let it dry. Place the pail in the garden in the desired location for your fountain. Insert a 3-foot long strip of rebar 15 inches into the ground beside the pail.
Cut a 4-foot long section of copper pipe. The pipe is one of the channels for the water, directing it from the pail to the old pump head. Drill a 5/8-inch hole through one side of the pipe, 2 feet from one end.
Solder the copper fitting to the opposite end of the copper pipe from the drilled hole. Fit the open end of the copper pipe over the rebar; position the drilled hole beside the pail. Solder the old water pump to the copper fitting on top of the pipe; position the pump head directly over the garden pail.
Attach a 4 1/2-foot length of flexible plastic tubing to the spout on the submersible fountain pump. Seal the tubing to the pump with duct tape if the fit is loose. Feed the other end of the tubing through the drilled hole and up inside the copper pipe to the base of the old water pump. When you plug in the fountain pump, the tubing will carry water up through the pipe. The water will flow through the old water pump and back into the garden pail.
How to Make a Water Fountain
You need three components for a basic water fountain: water flowing through a pipe system that recycles it, a pump to move...
How to Install a Hand Water Pump Fountain
A throwback to the olden days are the old hand-pump style water spout. You used to have to pump the handle to...
How to Install Hand Water Pumps
Getting water out of a well is easy if you have electricity and a working pump. In situations where supplying electricity to...