How to Troubleshoot Motorcycle Exhaust Smoke

by Lewis J. Fagleman
itstillruns article image
moteur de moto image by Emmanuel MARZIN from Fotolia.com

Smoke coming from a motorcycle exhaust indicates the engine is not running correctly. Typical problems include fuel not being completely burned, too much oil or coolant evaporating. If ignored, such problems can result in significant engine damage, and being able to identify the origin of the smoke, as quickly as possible, can reduce the risk of a costly repair. The color of the smoke is the main indicator of where the problem lies: white smoke indicates coolant- or water-related issues while darker smoke is common for fuel or oil problems.

Gray or Blue Smoke

Step 1

Remove and inspect the spark plugs if you see gray or blue exhaust smoke. Black soot on the spark plugs suggests that the fuel/air mixture is too rich, resulting in gray exhaust smoke. A shiny, wet, black film on the plugs is a result of excess oil, and this causes blue smoke.

Step 2

Check and clean the air cleaner which may have become clogged, causing gray smoke. The air cleaner may also have worked itself loose, in which case a new one will need to be fitted. If gray smoke persists, consult the user's manual for your bike to find out how to make the fuel mixture more lean.

Step 3

Inspect the piston ring and valve seals to ensure they are air-tight. If you are unsure how to do this and your user's manual does not provide instructions, seek professional assistance. Failure of these seals results in burning oil, hence a blue smoke, and the seals should be replaced immediately.

White Smoke

Step 1

Check the ambient air temperature. If it is below 50 degrees Fahrenheit, then white smoke is perfectly normal until the engine warms up. If it continues after the engine is warm, then there is a source of excess water somewhere in the engine.

Step 2

Check if there is too much oil in the oil reservoir and, if so, drain the excess oil and see if the exhaust continues to smoke. This is the most obvious cause of smoke when the engine burns oil.

Step 3

Inspect the cylinder heads, seals and pistons for wear. These faults can be caused by an engine overheating and can result in a blown head gasket. This is generally not a job that can be conducted at home, and any checks/repairs should be completed by your local dealer.

More Articles

article divider
×