How to Repair a Roland PC 600 ColorCAMM
When approaching how to repair a Roland PC ColorCAMM, focus on the driver default settings. This is because a correct installation depends on accurate follow-through of a two-part process. For example, in the first part, ColorChoice settings including the dither type, resolution, bitmap and vector rendering, and others must be precise. In the second part, the driver port must be be verified. If you overlook a setting, subsequent attempts to repair your ColorCAMM could fail.
Other People Are Reading
Instructions
-
Verify ColorChoice Default Settings
-
1
Click the "RCC for ColorCAMM" icon on the computer taskbar.
-
2
Click "Setup" and then click "Setup Properties."
-
-
3
Verify that the "Setup" name "ColorCAMM Pro PC-600" is selected.
-
4
Click the down arrow under "Port" and select "LPT1:."
-
5
Click the down arrow next to "Send" and select "Print & Contour" if you will be printing and cutting, click "Print Only" for printing only, or click "Contour Only" for cutting only.
-
6
Click "Apply."
-
7
Click the "Print" tab, click the down arrow next to "Resolution" and then select "1200 x 600."
-
8
Click the down arrow next to "Dither type" and then select "Angled Screen."
-
9
Click the "Perform color correction" checkbox to select it if it is not selected.
-
10
Click the down arrow next to "Profile" and select the ribbon you are using from the list. If the ribbons you are using are resin, set the "Profile" to "PC600ResOrGr_CPS-WH_1200.icm." If the ribbons you are using are wax, set the "Profile" to "PC600Wax_CPS-YP_1200.icm."
-
11
Click the down arrow next to "Color Mode" and select "CMYKOrGr(Resin)" if the ribbons you are using are resin, or select "CMYK(Wax)" if the ribbons you are using are wax.
-
12
Click the down arrow next to "Bitmap rendering intent" and then select "Perceptual."
-
13
Click the down arrow next to "Vector rendering intent" and then select "Spot Color."
-
14
Click "Apply," click "Setup" and then click "Test Print." Verify that the Roland PC 600 ColorCAMM is working properly. If it is not, review Steps 1 through 12 and recheck your settings and then proceed to the next section.
Verify Roland ColorCAMM PC-600 As Default
-
15
Click your desktop's "Start" menu, type "Printers" in the search box and press "Enter" to open the Printers folder. (Note: This step may vary slightly, based on the type of operating system you have and how you access the Printers folder.)
-
16
Right-click the "ColorCAMM PC-600" printer. Click "Properties" and then click the "Details" tab.
-
17
Click the down arrow under "Print to the following port" and then select "C:\PROGRAM FILES\RCC FOR COLORCAMM\Jobs\Roland\CCAMMPC600 (Hot Folder)."
-
18
Click the down arrow under "Print using the following driver" and select "AdobePS Roland ColorCAMM PC-600."
-
19
Click "Spool Settings," click "Print directly to the printer" and "Disable bi-directional support for this printer" to select these options.
-
20
Click "OK" and then click the "Paper" tab.
-
21
Click "Custom p+" under "Paper size: Custom page 1 (1.00 x 1.00 in)," click "Apply" and then click "OK." If your ColorCAMM does not function correctly, contact Roland Support (see Resources).
-
1
Tips & Warnings
To avoid incorrectly sized printouts, first determine the size of the design on the screen. Next, set the paper size to "Custom" and then set the paper size to equal the size of the design.
