How do I Program Spa Filter Settings?

Save

One important feature that comes with a spa is the ability to filter the spa, which is how the spa cleans itself to prevent dirt and other grime from piling up in the spa. Spas often come with filtration cycles--when the spa cleans itself--already pre-programmed. It is possible, however, for you to adjust these settings so that the spa cleans itself when you want it to. The method for doing this depends on the model of spa you own.

Zspas Hydro Spa

  • Press and hold the "Jets 1" key for about five seconds.

  • Press the "Temperature" keys to determine how many filtration cycles you want per day (you can set it to one, two or three).

  • Press the "Jets 1" key within five seconds of determining how many cycles per day and your settings are saved.

  • Press and hold the "Light" key for at least five seconds. Press the "Temperature" keys to determine the duration for a filtration cycle (you can choose 60, 120, 180 or 480 minutes).

  • Press the "Light" key within five seconds of determining the duration of the filtration cycle and your settings are saved.

ClearWater Spa

  • Press the "Temp" key, then the "Jets 1" key.

  • Press the "Temp" key to set the duration of the filter. You can set it for a minimum of one hour to a maximum of 12 hours.

  • Press "Jets 1" to determine how many filtration cycles you want per day. Press "Temp" to determine whether you only want day cycles ("d"), night cycles ("n") or both day and night cycles ("dn").

  • Press the "Jets 1" key to exit and save your settings.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Read Article

19 Home Decor DIYs That Only Look Expensive

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!