How to Replace a Nextar I4-BC Battery
The Nextar I4-BC is a portable navigation system designed for automotive use. Featuring a 4.3-inch color screen, the device is small enough to be carried around in a pocket and large enough to be used in a car by way of a dashboard mount. As an added feature, the GPS is accompanied with a backup camera that drivers can equip to their car for increased visibility when driving in reverse. While the device can be powered from an AC source such as your car's cigarette lighter, it can also run on an internal rechargeable battery. The battery may require replacement after extended use.
Other People Are Reading
Instructions
-
-
1
Turn off your I4-BC device and disconnect it from any power source to which it may currently be connected.
-
2
Remove the screws at the rear of our device using a small Phillips-head screwdriver.
-
-
3
Pull off the rear plastic casing on the device to reveal the device's internal electronics and rechargeable battery.
-
4
Disconnect the wiring harness connected to the current battery in the device and replace it with the new battery, ensuring that the wiring harness is snugly snapped into the new battery.
-
5
Place the rear plastic cover back on and tighten the screws to secure it.
-
6
Plug the device into an AC power source and allow the battery to charge before using the device with the new battery installed.
-
1
