Installing a sump pump in your basement is a way of avoiding most flooding issues in your home. As the water rises, the pump removes it. To be effective however, the pump must be located beneath the concrete floor. To do this you'll need to break through the floor to the soil beneath. Breaking through the concrete requires heavy labor and an electric jackhammer. The jackhammer makes quick work of the cutting process, however. Once the hole is cut, you can install your sump pump right away.
Things You'll Need
- Pump liner
- Safety goggles
- Work gloves
- Face mask
- Electric jackhammer
- Wire cutters
Contact your local utilities company to identify the location of any pipes running through the area in order to avoid accidentally cutting into them.
Locate a spot for your pump that's at a low point of the floor so that the water drains in its direction. Choose an area near an exterior wall as well, to make placing the discharge pipe easier.
Place the pump liner upright on the floor in the location you've chosen. Mark an outline around the liner with chalk, and then place a second line around the first about 4 inches away to serve as a guide for digging the hole. The extra space is for the gravel layer around the pump.
Put on a pair of safety goggles, work gloves and a face mask. Use a jackhammer to break through the concrete slab inside the outer circle of chalk. You can rent the jackhammer from a home improvement store or an equipment rental shop. Break up the entire area within the circle with the jackhammer, working from the center of the circle outward. Cut through any steel mesh that may be present in the slab with a pair of heavy-duty wire cutters.
Dig the soil from the hole with a spade after cutting through the concrete to a depth of the liner plus 12 inches. Level the soil at the bottom of the hole, packing it tightly with the spade to make ready for the sump pump installation.
- Photo Credit Stockbyte/Stockbyte/Getty Images
How to Install a Sump Pump
How to Install a Sump Pump. If water getting into your basement is an ongoing issue, a sump pump may be the...
How to Cut a Concrete Floor
Cutting a concrete floor is not hard to accomplish if you have the right tools on hand. Most tool rental outlets rent...
How to Build a Concrete Sump Pit
A sump pit is a hole located in an area where unwanted water gathers. The purpose of the pit is to collect...
How to Make a Sump Pump Pit
When unwanted water gathers in your basement or crawl space, it can cause any number of problems. There are few options better...
How to Deal With a Flooded Yard With Only a Garden Hose
Many homeowners fear flooding. It can ruin yards and gardens and cause countless problems with staining and mold inside the home. Even...
How do I Level Ground for Concrete Slab?
Whether you want to add or extend a porch to your backyard, build a new shed or lay a new driveway, you...
How to Cut a Hole in a Concrete Foundation
A hammer drill is designed to drill holes in masonry and concrete using a masonry drill bit or hole saw. This type...
How to Add a Basement Shower Without Breaking Concrete
If the contractor made provisions for adding a bathroom in the basement during the construction of your home, you’ll find plumbing stub-outs...