How Does the CD-IB100II Connect to the AVIC-N2?
Pioneer designs many of its multimedia receivers to connect to external units. The AVIC-N2 is designed to connect to an iPod as an external unit using the CD-IB100II adapter. The AVIC-N2 can then receive information about the files stored on the iPod and send commands to the unit to control audio playback. The CD-IB100II connects to the AVIC-N2 via the IP-BUS port on the back of the unit. Installing this cable involves removing the receiver from your vehicle's dashboard to access the port. Consult your vehicle's user manual for information on removing the receiver. Different vehicles use different mounting systems.
Other People Are Reading
Instructions
-
-
1
Disconnect the wire from your vehicle's negative battery terminal.
-
2
Locate an accessory power line in your vehicle. An accessory line will only receive power when the vehicle's ignition is in the "ACC" or "ON" position. Most vehicles' cigarette lighters are on an ACC circuit. Consult your vehicle's owner's manual for more information.
-
-
3
Open one of the tap-in wire connectors and place the end of the CD-IB100II's yellow wire all the way in the smaller channel of the connector. Place the red wire of the accessory power line in the larger channel. Close the tap-in wire connector around the wires and squeeze it shut with the pliers.
-
4
Open the other tap-in wire connector and place the end of the CD-IB100II's black wire all the way in the smaller channel of the connector. Place the black wire of the accessory power line in the larger channel. Close the connector around the wires and squeeze it shut with the pliers.
-
5
Remove your AVIC-N2 from the vehicle's dashboard. Connect the blue end of the IP-BUS cable to the blue IP-BUS port on the back of the AVIC-N2. Connect the black end of the IP-BUS cable to the black IP-BUS port on the back of the CD-IB100II.
-
6
Use the included Velcro to attach the CD-IB100II to the floor of your vehicle. Reinstall the AVIC-N2 in your vehicle's dashboard.
-
7
Reconnect the negative wire to your vehicle's negative battery terminal.
-
8
Connect your iPod to the end of the CD-IB100II's dock cable. Touch the source icon in the upper left corner of the AVIC-N2's screen and select "EXT-1" to control the iPod.
-
1
