How to Troubleshoot Vacuuming a Swimming Pool

A swimming pool requires regular vacuuming.

Swimming pools need regular cleaning to prevent the development of algae on the walls. An indication of algae development on your swimming pool walls is a slimy feeling when you touch the wall. Swimming pool vacuums are used to remove the algae from the walls, as well as to remove any debris that falls into the pool. A swimming pool vacuum is attached to the pool's pump. The natural suction creates a vacuum. Problems with a pool vacuum require you to check the pumps and hoses.

Things You'll Need

• Garden hose

Instructions

1. Inspect the hose connection to the pump. Tighten it as much as possible. Check that the pump is turned on.

2. Check the pump's primer by looking in the primer window. You should see water inside. If there is no water, prime the pump according to the instructions in the pump's manual.

3. Inspect the hose for leaks or cracks. Tighten it where any leaks are occuring. Replace the hose if it is cracked.

4. Inspect the pool filters for clogging. Remove the side filters and rinse them out, or remove debris such as leaves from the filter.

5. Check the inside of the vacuum tube for clogs. Insert a garden hose into the suction hose and blast the clog with water to clear it out.

References

• Swim University: How to Vacuum Your Above Ground Pool
• Pool Center: My Pool Has a Bathtub Ring...
• Wet Head Media: How to Hook Up Pool Vacuum
• Par Pool Spa: How to Vacuum a Swimming Pool

Resources

• Read this Article in Spanish