You can remove dried polyvinyl acetate (PVAc)--a rubber-like synthetic polymer used in adhesives--from a variety of surfaces, such as plastic (wood-effect) doors, wood and laminate flooring, using white spirit, vinegar or paint thinner. The PVAc is also water-soluble, so you can remove it with several water-based products, including simple, cost-effective home solutions like warm, soapy water. Interestingly, PVAc is itself used as a dried PVAc glue remover when it has been solubilized and can also act to remove emulsion-based paint. According to The Furniture Industry Research Association, joints fixed with PVAc wood glue can resist 30 kg forces over extended periods of time. Chemical and environmental engineers need different methods of removal, such as ozonation.
Step 1
Apply a thin layer of white spirit to the surface to be cleaned using a clean cloth. Wait a minute or two for the white spirit to act on the dried PVAc.
Video of the Day
Step 2
Take a second cloth and soak it in warm, soapy water. Ordinary, household dish soap works fine. Squeeze out the excess. Gently wipe the PVAc off the surface with the cloth. Work it until you see results.
Step 3
Repeat the steps to remove all the dried PVAc. Wet a clean cloth with a solubilized PVAc product (liquid), or even nail polish remover. Rub to remove excess dried PVAc with the cloth.
Step 4
Scrape off tough PVAc residue with an old, still-sharp razor blade. Use the razor blade out of the razor housing as a separated entity. Wear thick gloves to protect your fingers.
Step 5
Use a wallpaper steamer if you still cannot remove the PVAc. Heat in the form of steam can speed up or enhance the removal process, if you are having difficulty.
Video of the Day