How to Put a Buckle on a Bullet Belt
Belt buckles are a fashion accessory that can transform the appearance of a belt, or even an entire outfit. Changing the buckle on an old belt can give the belt an entirely different look. Some belts are more challenging to work with than others, one example being the bullet belt -- a belt lined with bullets. The procedure for attaching a belt buckle to this kind of belt is the same as it is for other belts, however, you will have to take into account the size of the belt buckle compared to the size of the bullets. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Measure the size of the bullets on the bullet belt prior to picking up a belt buckle. The belt buckle will have to be big enough to fit over the bullets on the belt.
-
2
Lay the bullet belt on a flat surface, such as a table.
-
-
3
Slide the belt buckle over the belt or snap it into place, depending on what kind of belt buckle it is. Either a snap-on belt buckle or slide-on belt buckle will work, however, the snapping mechanism or sliding notch has to be large enough in diameter to fit over the bullets on the belt.
-
4
Slide the bullets off the belt hook if the buckle is too small to slide over the bullets. Measure out how many bullets will need to be removed in order to position the buckle in the center of the belt.
-
5
Insert the belt buckle and replace the removed bullets back onto the belt.
-
1
References
- Photo Credit belt image by Aleksandr Ugorenkov from Fotolia.com
