How to Connect Sony Video Conferencing With Aethra

An ethernet cable will connect an Aethra network component to Sony video conferencing equipment.

Sony video conferencing stations are equipped with a variety of input jacks for digital cameras, microphones and computers for your multimedia presentation. Aethra manufactures telecommunication networking devices for large corporations that may require hundreds of phone lines. Sony conferencing stations connect to a network device such as Aethra using an ethernet cable.

Things You'll Need

• Ethernet cable

Instructions

1. Shut off the toggle switch on the back of the Sony video conferencing system to power down the unit.

2. Plug in the ethernet cable to the network port on the back edge of the Sony unit. Note that the wide edge of the plug must face downward to insert correctly in the network port.

3. Connect the plug on the other end of the cable to one of the ports on the connection panel of the Aethra network component.

4. Power on the Sony video conferencing system. The number assigned to the Aethra port is the number to use for placing a video conferencing call over the network.

References

• Aethra: Telecommunications Access Networks
• Sony: Video Conferencing System Brochures
• Aethra: Connection Diagrams