How to Program 2007 Honda CRV Remotes

The Honda CR-V is a small-sized sport utility vehicle that comes with an optional remote for keyless entry. If the remote somehow gets deprogrammed or another remote is added to the vehicle, the remote must be programmed to work with your specific CR-V. Failure to do so will result in a non-functioning remote. Luckily, programming a remote for a Honda CR-V can be done with just the car and the remote in a matter of minutes.

Instructions

1. Sit in the vehicle with all of the doors and the back hatch closed completely.

2. Insert the vehicle's key into the ignition, and turn it to the "On" position. You do not need to start the car.

3. Press the "Lock" button on the remote immediately after turning the key to the "On" position.

4. Turn the key to "Off" position.

5. Repeat Steps 2 through 4 three more times for a total of four cycles. After you press the "Lock" button for the fourth time, the locks will make a clunking sound. The vehicle is now in programming mode.

6. Press the "Lock" button on the remote you want to program.

7. Turn the key to the "Off" position, and remove the key from the ignition. The remote is now programmed to work with your Honda CR-V.

References

• Handa Accessories: Keyless Entry Programming