How to Calculate Water Wheel Power

Hydroelectric plants transform potential energy of water into electricity.
••• hoover dam image by Dave from Fotolia.com

Tremendous potential energy exists in falling water, which is the basis of hydroelectric plants. Falling water can be from a waterfall or moving down a stream because of changes in elevation. Hydroelectric plants tap into this potential energy by forcing the water to move a large water wheels that are connected to turbine generators. The power of generated can be calculated the the height and flow of the water.

    Acquire the necessary data. You will need the net head and the flow-rate.

    The net head is the distance from the source of the falling water to the water wheel. This figure is usually degraded twists and turns in the flow and friction rates. These degradations can be referenced for an estimated net head measurement. This is usually measured in meters or feet.

    The flow rate is the volume of water moving onto the water wheel per unit time. This is usually measured in liters per second, cubic meters per second or cubic feet per second.

    Multiply the net head distance in meters times the flow rate in liters per second times 9.81, which is the acceleration due to gravity, measured in meters per second. This calculates the hydro power in watts. As an example, If the net head was 20 meters with a flow rate of 25 liters per second, then the hydro power would be 20 times 25 times 9.81, or 4,905 watts.

    If you are using feet, then the formula changes slightly to factor in the conversion. In this case, multiply the head in feet times the flow rate in cubic feet per second times the conversion factor of 84.6 to calculate hydro power in watts.

    Multiply the hydro power by the unit's efficiency rating, usually listed as a percentage in its specifications. In the example, if you had an efficiency rating of 60 percent, then you would divide that number by 100 to convert it to decimal format. Then multiply that number by the hydro power of 4,905 watts to calculate the water wheel's power of 2,943 watts.

Related Articles

How to Convert GPM to HP
How to Calculate Fan Output
How Is Hydropower Gathered or Created?
How to Figure GPM Water Flow on an Existing Chiller
How to Calculate Static Head
How to Calculate Stream Power
How To Calculate CFMs
How to Read Pump Curves
How Does a Waterfall Generate Power?
How to Calculate Tons of Cooling for a Cooling Tower
How to Convert CV to GPM
How to Design a Centrifugal Pump
Different Ways to Make Electricity
How to Calculate GPM from PSI for Water
How to Calculate Evaporator Sizing
How to Calculate Buoy Floatation in the Water
How to Calculate CFM Output
How to Build a Micro-Hydro Turbine Generator
Factors Affecting a River's Velocity