How to Program a Key Fob for a Chrysler

by Leonardo R. Grabkowski
itstillruns article image
Stephen Walter/Demand Media

Many Chrysler vehicles are equipped with "key fobs," also called "keyless remotes," that can be easily programmed at home. In addition to Chrysler products, these instructions will also work for Dodge, Plymouth and Jeep vehicles, as long as the key fob looks like the one shown in the photo.

Step 1

itstillruns article image

Turn your car's engine off and turn the ignition to the key "run" position. Look closely at the ignition to determine the position.

Step 2

itstillruns article image

Press and hold the "unlock" button on your functional key fob. Hold the button for five seconds, and then hold the "panic" button for one second (while still holding the "unlock" button).

Step 3

itstillruns article image

Release both buttons simultaneously. Listen for a chime to signal that the key fob is in programming mode. If you don't hear the chime, start the procedure over.

Step 4

itstillruns article image

Press and release the "lock" and "unlock" button on the functional key fob, and then simultaneously press and release the "unlock" button on the functional key fob and the key fob you want to program.

Step 5

itstillruns article image

Listen for the chime to confirm that the key fob has been programmed. Turn the ignition to the "off" position to exit programming mode.

More Articles

article divider
×