How to Program Keyless Entry for a Dodge

Program keyless entry remotes for a Dodge vehicle using Dodge's simple instructions.

Dodge is an automobile manufacturer that produces dozens of different vehicle models. Dodge's models include the Caravan, Durango and the Viper. Most late model Dodge vehicles feature keyless entry remotes, which allow you to control some of the mechanics of your vehicle from a distance, such as locking and unlocking doors and opening the trunk. If you want to program a new remote for your Dodge vehicle, you can only do so if you are in possession of at least one already programmed remote. Otherwise you will need to contact your local Dodge service department for assistance.

Instructions

1. Push the "Lock" button on your already programmed remote five times with two seconds in between each push.

2. Place your un-programmed key into the ignition and turn the key to the setting just before "On."

3. Push the "Unlock" button on your programmed remote for no less than four seconds but no more than 10 seconds. While you have the "Unlock" button held down, you need to also push down on the "Panic" button, letting go of both buttons at the same time. Your Dodge vehicle will chime, which indicates you've successfully followed the programming instructions to this point.

4. Push the "Lock" and "Unlock" buttons on the un-programmed remote at the same time. Let go and press the "Unlock" button. Your Dodge vehicle will chime once again, letting you know you've successfully programmed your new remote.

References

• Program Your Remote: Dodge