Installation Instructions for an AEM Cold Air Intake

The AEM cold air intake is considered to be one of the best on the market.

AEM is one of the leading aftermarket vehicle performance parts manufacturers in the world. They create a wide variety of performance parts, but their most popular is the cold air intake. Cold air intakes bring cold air into the engine, which cools the engine more quickly and gives your vehicle a better fuel-to-air mixture. In return, the engine pumps out more horsepower and torque.

Things You'll Need

• AEM cold air intake kit
• Ratchet
• Screwdriver

Instructions

1. Turn off the vehicle and remove the vehicle's battery from the engine compartment. Place it to the side.

2. Unbolt the stock air box from the throttle body. Use the screwdriver to remove the hose clamps from the engine intake hose.

3. Remove the temperature sensor from the intake hose. Insert the AEM cold air intake hose into the engine's intake port and secure it with the hose clamp.

4. Insert the temperature sensor into the cold air intake's sensor port, and bolt the cold air intake to the throttle body using the ratchet.

5. Attach the conical filter to the bottom of the cold air intake's hose using the last hose clamp. Reattach the battery. Turn the car on, and test the new cold air intake.

References

• AEMIntakes: Installation Instructions

Resources

• AEMIntakes: Install Tips