Instructions for a Beer Bong

A beer bong is a device constructed of a funnel and tubing use to chug brew. Beer bongs allow users to drink multiple beers at the same time. Most beer bongs designed for use by a single person can be constructed with less than $10 worth of supplies from a general store. When drinking responsibly and in a safe location, beer enthusiasts can enjoy chugging or other party games with their homemade beer bong.

Things You'll Need

• 3 or 4 feet of clear plastic tubing, 2 or 3 mm width
• Funnel
• Hair dryer or tape
• Beer

Instructions

Construction

1. Cut a three- or four-foot piece of clear plastic tubing. If the beer bong is intended to chug no more than two beers, use only three feet.

2. Push the narrow end of the funnel into the tubing. If the fit is snug, this could take a good deal of work.

3. Seal the funnel and tubing together with the blow dryer to prevent beer from leaking. Use the hottest setting to melt the tubing and funnel together. Tape is a good alternative to melting the tubing, but make sure the tape creates a leak proof seal.

Use

1. Kneel on the floor with the end of the tubing in your mouth.

2. While the drinker is kneeling, the person designated to pour the beer should hold the beer bong so that the tubing is extended, creating a straight path from the funnel to the drinker. If necessary, have the person pouring stand on a chair.

3. Instruct the person pouring beer to pour into the funnel when the drinker ready. Take into consideration the length of the tubing when deciding how many beers to pour. Three feet of tubing can only hold one to two beers, while four feet can hold three.

4. Drink the beer. Remember to respect your limits and to drink responsibly.

References

• Beer Bongs
• Made Man: How to Beer Bong
• Beer Masters: How to Make a Homemade Beer Bong