Instructions for an SCX-101 Foot Controller
The DMX Foot Controller SCX-101 has the ability to control an intelligent light system via its 16-channel mixer. You can coordinate up to 16 scenes and 16 chase patterns, as well as handle dimming and black out actions. All the lighting actions handled by the device fall into one of three basic categories of scene programming: fading, chasing and patterning. Each of the actions follow the same programming steps.
Other People Are Reading
Instructions
-
-
1
Press and hold the "Up/Down" buttons and turn the "Power" switch at the same time. You will see "F20" appear on the display.
-
2
Press the "DMX" button on the device to initialize the settings. Once the settings are initialized, the unit is ready to accept programming instructions.
-
-
3
Press the channel button to which you wish to program a particular action. The channel buttons are on the top-left corner of the device.
-
4
Press "Page" to decide the scenes programming number. The display will show scene numbers for you to choose from.
-
5
Press "MEM" button while under the scene number setting. Once you press "MEM" the LED glimmers.
-
6
Slide the level wheel up or down to adjust the channel level. The setting affects the level of the lighting effect being performed (fading, chasing).
-
7
Press and hold the "MEM" and "Scene Number" buttons to save the level settings.
-
1
Tips & Warnings
The foot pedal will be connected to the device and the effect that is performed is determined by which effect button is active (chase button, audio). The process of adjusting and saving the level settings remains the same regardless of the lighting effect performed.
