How to Set Up Viewsat Ultra & SG2100

It's easy to install your SG2100 and Viewsat Ultra on your camper or RV.

The Viewsat Ultra is a satellite television receiver that is used with campers and RVs to give you satellite television while you're on the road. One of the main problems associated with having satellite television in an RV is that the signal can be obstructed by trees or buildings. With the SG2100 motor, however, you can rotate the Viewsat receiver until you get a clear picture. Installing these items takes just a few cables.

Things You'll Need

• Coaxial cable
• Component cables

Instructions

1. Assemble the SG2100 motor per the assembly diagram (see References). Aim the motor true south via the magnetic variation table that comes with the motor.

2. Set the motor elevation angle with the inclinometer that came with your motor.

3. Attach the Viewsat antenna dish to the motor with the hardware provided. Set the declination angle to 40 degrees per the declination table on the motor.

4. Connect the coaxial cable to the satellite dish. Connect the other end of the coaxial cable to the Satellite In jack on the Viewsat receiver.

5. Connect the component cables to the Video and Audio outputs on the Viewsat. Connect the other ends of the component cables to the Video and Audio inputs on your TV.

References

• FTA List: Getting Started
• Satcruiser: SG2100 Manual