Jacuzzi Directions

Jacuzzi is a manufacturer of both bath tubs and hot tubs.

If you've bought a Jacuzzi brand hot tub, but have no instruction manual, even simple operations like changing the temperature can seem confusing. Jacuzzi produces many hot tubs, but they generally fall into three categories, the J-200, J-300 and J-400 ranges. Your Jacuzzi's model number will be in one of these ranges, and will have two individual numbers as the last two digits to identify it specifically. Jacuzzi models have control panels, which can be used to perform functions like turning on the jets or altering the temperature.

Instructions

Setting Water Temperature

1. Locate your Jacuzzi's control panel. On all Jacuzzi models, the control panel is on the top rim of the tub, in a cut-away section. It will be oval in shape and be on the opposite side from the "waterfall" mechanism.

2. Adjust the temperature from the main screen. On J-200 and J-300 models, this can be done by pressing the "+" and "-" buttons. These are located on the bottom side of the control panel, to the left on the J-300 models and to the right on the J-200 models. On either of these models, the buttons are located to the left of the button with the bulb icon. When increasing the temperature, hold the "+" button and press and hold the "Jets 1" button. The "Jets 1" button is the highest button on both the J-200 and J-300 model groups.

3. Press "Up" or "Down" on the large, circular "Navigational Quad Keypad" control on J-400 models to change the temperature. This is located to the far right of the panel. The current temperature is displayed in the center of the display screen. When it is successfully changed, the display will show the change in temperature. The J-400 has an on-screen heating indicator, which is a circular thermometer icon that appears on the left of the screen during heating.

Activating Jets

1. Press the relevant "Jet" button to activate the jet on the J-200 and J-300 models. The "Jet" buttons are the highest buttons on the control panel on both model groups. The "Jet 2" button is labeled with a number two to help differentiate between them.

2. Press the "Jet" button again to change the setting of the selected "Jet". For the "Jet 1" buttons, the first press puts the jet on, but slowly, the second press increases the speed, and the third stops the jet. On the "Jet 2" control, you merely use the button to toggle between fast and off.

3. Press the "B" key if you have a J-400 model. The "B" key is triangular and located near the bottom left hand corner of the display screen. This brings up the "Jets" menu, from which you can activate or deactivate the jets. Press the "A" and "C" buttons to switch the pumps on and off. These are the buttons to the top left and top right of the display, respectively. After you've activated a jet, it will automatically turn off after 20 minutes.

References

• Jacuzzi: J-400 Series Owner's Manual (Pages 39-42 and 56)
• Jacuzzi: J-200 Series Owner's Manual (Pages 29 and 30)
• Jacuzzi: J-300 Series Owner's Manual (Pages 28 and 29)

Resources

• Jacuzzi