Things You'll Need
Safety glasses
Oxy-acetylene torch
Welding gloves
Striker
Wrench to fit corroded bolt
Even though aluminum does not rust, corrosion can still form between aluminum and a non-aluminum bolt. This is especially true of aluminum parts and stainless steel bolts subjected to saltwater. The saltwater causes electrolysis between the metals. This will corrode the two unlike metals and create a bond nearly as strong as welding the pieces together. To break this bond, you need to expand the aluminum with heat. Since aluminum is an excellent heat sink, you need a lot of heat to free the corroded bolt.
Step 1
Put on safety glasses.
Video of the Day
Step 2
Inspect the oxy-acetylene torch to ensure that parts are not damaged. Pay special attention to the oxygen and acetylene gas lines as both gases are highly flammable and a leak can quickly lead to a fire.
Step 3
Put on welding gloves. Turn on the acetylene valve of the oxy-acetylene torch and ignite the acetylene with the striker.
Step 4
Open the oxygen valve of the oxy-acetylene torch and adjust the valve until you have a blue neutral outer flame and a bright blue inner flame that is between 3/8 and 1/2 inch in length.
Step 5
Heat the corroded bolt by placing the neutral flame of the oxy-acetylene torch 3 to 4 inches away from the head of the bolt. Aluminum will draw heat from the bolt, so you will need to heat the bolt longer than a standard carbon bolt.
Step 6
Stop heating the bolt when the bolt head glows a dull orange. Allow the bolt to cool naturally back to room temperature.
Step 7
Place the wrench on the head of the bolt and attempt to loosen the corroded bolt. If the bolt does not move, repeat Steps 5 and 6 until the bolt works free of the aluminum part.
Video of the Day