How to Install an In-Car TV Aerial
A TV aerial, also known as an antenna, must be used in order to watch television in a car. You can install a TV aerial yourself inside the car with a few supplies common to most households and from an aftermarket car dealership. The TV aerial can be purchased from an electronics store or from an aftermarket car dealership as well. The interior of the car will not be damaged, nor will you have to route any wires from the outside to the inside of the car.
Other People Are Reading
Instructions
-
-
1
Spray glass cleaner on the outside of the car's rear window. Wipe the window clean with a chamois. Repeat this procedure on the inside of the car's rear window.
-
2
Remove the backing paper from the sides of the antenna. Place the sticky side of the antenna flat against the inside of the rear window to the left of center. Push against the antenna to secure it to the window. Let the antenna stick to the window for an hour before proceeding.
-
-
3
Run the antenna wire down the lower side of the car on the passengers side. Pull the antenna wire under the passenger seat. Screw the connector on the end of the antenna wire into the antenna input on the TV receiver that is mounted beneath the passenger seat.
-
4
Affix cloth tape the same color as the car's carpeting against the antenna wire running along the lower side of the car to secure it.
-
1
Tips & Warnings
The TV signal's strength can be enhanced with a TV signal booster installed between the antenna and the TV receiver in the car.
