How to Reinstall SBC Global
When upgrading to a new computer or adding your current service to an additional computer, your SBC Global DSL modem must be installed on the alternate computer using the CD that came with it. The CD contains the Installation Wizard, which installs the drivers necessary for connecting your computer to the modem. The installation CD is compatible with both Macs and Windows-based PCs, though it may ask for an additional key code when installing the modem on your Mac, according to the official AT&T site.
Other People Are Reading
Things You'll Need
- SBC Global installation CD
- DSL filter
- SBC Global DSL modem
- Modem power cable
- DSL cable
Instructions
-
-
1
Connect the power cable into the SBC Global modem's power port.
-
2
Insert the SBC Global software CD into your computer's optical drive. Click "Next" and "Install" to proceed with the installation. Enter "525Z 25Z4 6266 22AS B2DC" on your Macintosh computer if the installation wizard asks for a code.
-
-
3
Plug the DSL filter into your wall jack and plug the modem's DSL cable into the "Line" port on the filter.
-
4
Plug the remaining end of the cable into the modem.
-
5
Plug the Ethernet cable into the modem and into your computer's Ethernet port to set up the service.
-
1
