Polyester Strapping Tensioner Instructions
Polyester strapping tensioners are called tie downs or ratchets. There is a polyester strap attached to one end of the center tensioner in a fixed position. The other loose end of the strapping goes around objects to anchor them and feeds through the tensioner. This type of securing tool is available in several widths for securing small packages or large loads on a utility trailer.
Other People Are Reading
Instructions
-
Securing Tensioners
-
1
Press the two halves of the tensioner buckle together to close it. Place the tensioner near the load to secure or on an object to secure.
-
2
Thread the polyester strapping loose end through the center slot of the closed tensioner.
-
-
3
Pull the excess strapping through the tensioner to secure the items loosely. Open and close the ratchet handle until the strapping is tight. Push both ends of the tensioner together to close and lock it.
Removing Tensioners
-
4
Grasp the tensioner with one hand and hold it in position. Pull the lock down with two fingers to unlock the grip.
-
5
Open the tensioner by pulling the two ends away from each other and laying it flat. There will be an audible click when it is open fully.
-
6
Grasp the strapping on the side of the tensioner where the strapping feeds through it. Pull the strapping out of the tensioner to loosen it. Pull and hold the lock with one hand and pull the strapping entirely out of the tensioner.
-
1
Tips & Warnings
Do not place hands or fingers under strapping while tightening it. Doing so could result in injury.
