How to Replace a Headlight Switch
by Editorial TeamIf your low beams won't activate, or your lights just won't come on at all, it's likely time to replace your car headlight switch. This is a common problem on cars of all makes and models, and the repair can be done in your garage rather than handing over the money to a mechanic.
Step 1
Disconnect the negative cable from your battery and wait 5 to 10 minutes to allow the capacitors for the airbags to discharge.
Step 2
Remove any screws around the switch, or pry the retaining ring that holds the switch in place away from the dash.
Step 3
Slide the switch out of the dash carefully, and remove the wire plugs. Attach a spring clamp onto the plugs to keep them from falling into the dash where they are difficult to fish back out.
Step 4
Pull the light switch into the on position, press the headlight case button and remove the switch. Using a screwdriver helps if your case has more than one release button. You may have to remove a nut at the bottom of the switch shaft to remove the decorative bezel.
Step 5
Insert the new car headlight switch into the housing and replace the bezel and shaft nut if necessary.
Step 6
Attach the wire plugs, taking care not to bend any contacts. Slide the housing and switch back into the dash without binding the connecting wires.
Step 7
Put back any trim and mounting screws before reconnecting the negative battery wire. Test the switch and the low and high beams.
Things You'll Need
- Wrench
- Screwdriver
- Allen wrench
- Replacement switch
Writer Bio
This article was written by the CareerTrend team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. To submit your questions or ideas, or to simply learn more about CareerTrend, contact us [here](http://careertrend.com/about-us).
