How to Setup a CD on an Asus M2N32 SLI Deluxe Wireless Edition
The Asus M2N32 SLI Deluxe Wireless Edition is a motherboard designed for a desktop computer. Setting up your CD to your Asus M2N32 SLI Deluxe Wireless Edition will require installing the drive. Your Asus M2N32 SLI Deluxe Wireless Edition will not recognize your device if it is not installed correctly. You must properly set the jumper on the back of your CD-ROM after installation for it to be recognized by your system.
Other People Are Reading
Instructions
-
-
1
Turn off your desktop computer and remove the power cord.
-
2
Remove the side of your computer case by removing the two screws that secure it.
-
-
3
Place your CD-ROM drive into an empty tray at the front of your computer.
-
4
Secure the drive to your case using the two screws that come with it.
-
5
Connect the IDE cable to the back of your CD-ROM.
-
6
Connect the other end of the cable to an empty IDE port on your Asus M2N32 SLI Deluxe Wireless Edition motherboard. The IDE port will be clearly labeled.
-
7
Connect a four-pin power connector extending from your power supply to the back of your CD-ROM.
-
8
Place the jumper vertically over the two pins in the very middle of the jumper pins. There will be six jumper pins in total.
-
9
Replace the side of your case and your computer's power cord.
-
1
