Towing Instructions for a Nissan Altima
Though small passenger vehicles are not designed to tow large loads, sometimes it can become necessary to do so. The Nissan Altima can tow loads up to 1,000 pounds with a trailer tongue weight of up to 100 pounds. If the trailer meets these specifications and the vehicle has a towing hitch installed, the setup and towing instructions for a Nissan Altima are the same as towing with any other type of vehicle.
Other People Are Reading
Instructions
-
-
1
Lift the trailer tongue and place it on top of the hitch tongue. Push down on the trailer hitch's locking mechanism to lock the hitch into place. Consult the trailer's owner's manual for specific locking instructions.
-
2
Plug the trailer's electrical connector cable into the electrical connection port on the back of the vehicle.
-
-
3
Connect the electrical connector cable's chain to hook near the electrical connection port on the back of the vehicle. This chain will prevent the cable from coming accidentally unplugged.
-
4
Press the brake pedal and turn on each turn signal to ensure that the trailer's brake lights and turn signal lights are functioning.
-
5
Drive the Nissan Altima and its tow load to its destination.
-
1
Tips & Warnings
Do not exceed 55 mph while towing.
The tow weight cannot exceed 1,000 pounds and the trailer's tongue weight cannot exceed 100 pounds.
Be careful backing up while towing. Allow plenty of room.
Take corners wide. Towing a load restricts the car's ability to make tight turns and U-turns.
