Dynacraft Handle Bar Assembly Instructions

Dynacraft handlebars are adjustable to each rider's needs.

Dynacraft is known for its high-quality bicycles including mountain bicycles, street bicycles and road bicycles. For each of their bicycles, the handlebars must be assembled and attached to the bicycle. Although easy to assemble, the Dynacraft handlebars are designed to be adjusted to meet the individual needs of each rider. This includes the height of the handlebars and the angle at which the handlebars extend from the handlebar stem.

Things You'll Need

• Allen wrench

Instructions

1. Unplug the stem wedge bolt protective cap located at the top of the handlebar stem.

2. Loosen the stem wedge bolt using an Allen wrench.

3. Slide the handlebar stem into the top of the handlebar tube on the main bicycle stem. The handlebars should be facing the front of the bicycle. Ensure that all wires are clear from the handlebar stem.

4. Tighten the stem wedge bolt using an Allen wrench.

5. Replug the stem wedge bolt protective cap.

6. Loosen the handlebar binder bolt with an Allen wrench to rotate the angle of the handlebars to the most comfortable angle for the rider.

7. Tighten the handlebar binder bolt with an Allen wrench.

References

• Dynacraft Bike: Dynacraft Manual 2006