How to Replace the Foam in a Seat Cushion

Look for foam that is the shape of the cushion.

Constant use and age wears down the foam inside seat cushions. The foam breaks apart, losing effectiveness. Replace the old, broken foam with a new piece. Adding new foam not only makes the cushion more effective and comfortable, it also creates a fuller, newer look for the chair. Buy the foam pieces from craft stores or furniture supply stores.

Things You'll Need

• Mop bucket
• Liquid laundry soap
• Rag

Instructions

1. Open the seat cushion cover. Most seat covers fasten with a zipper.

2. Remove the old cushion. If possible, turn the cushion inside out and shake off any bits of cushion remaining inside. Turn the cushion cover right side out.

3. Pour two to three drops of laundry soap inside a mop bucket. Fill the bucket halfway with warm water. Dip the rag inside of the bucket to wet it. Wring out the excess water.

4. Wipe down the cushion cover with the rag. Set the cushion aside to dry.

5. Place the piece of foam on a flat surface. Take one end of the open cushion cover and pull it over one side of the foam. Repeat until the foam piece is covered.

6. Close the cover and place it on the seat.

Tips & Warnings

• Check the warranty to see if you can replace your cushion for free first.

References

• eFoam Store: Seat Cushion Foam