How to Remove the Head Lights in a 2000 Dodge Intrepid

The 2000 Dodge Intrepid headlight has removable bulbs to simplify the replacement process. If a headlight bulb burns out, you can replace the individual bulb instead of having to buy a costly headlight assembly. You can buy a 9005 high beam bulb or a 9006 low beam bulb from an auto parts retailer and change them at home in minutes.

Things You'll Need

• Socket and ratchet set

Instructions

1. Raise the hood of the Intrepid and secure it with the support rod. Remove the bolts securing the crossbar over the headlight assemblies using a socket and ratchet. Set the crossbar aside.

2. Disconnect the wiring harness from the bulb you need to change. The inside bulb is the high beam and the outer bulb is the low beam. Turn the bulb socket counterclockwise. Pull straight back to remove the bulb socket from the car.

3. Pull the bulb out of the socket. Push the new bulb into the socket and insert it into the headlight assembly. Turn it clockwise to lock it. Push the electrical connection into place until it clicks.

4. Repeat the process on the other side. Set the crossbar in place and secure it with the mounting bolts. Tighten the bolts with a socket and ratchet.

5. Close the hood and test the lights.

References

• "2000 Dodge Intrepid Factory Service Manual;" Chrysler Group, LLC; 1999