How to Change the Filter in a Hotpoint Air Conditioner

GE manufactures the Hotpoint line of room air conditioners. One way to keep your Hotpoint air conditioner operating at peak efficiency is to change the air filter regularly. The air filter captures dust and dirt particles, much the same way that your furnace filter does. When the air filter is dirty, the air conditioner works harder. Changing the filter in a Hotpoint air conditioner is not difficult once you determine how the filter installs. Although all filters are located behind the grille, some models require you to remove the grille, while others require no disassembly of the unit.

Things You'll Need

• Replacement filter

Instructions

1. Look for a tab on the top, right side or near the bottom of the front grille. The tab protrudes slightly from the grille.

2. Pull the tab with your fingers and remove the filter from the Hotpoint air conditioner. The tab is part of the air filter.

3. Insert a new air filter in the air conditioner until you hear the plastic part of the filter click into place.

4. Lift the bottom of the front grille up and out if the filter is not visible. Unclip the top of the front grille and pull it away from the air conditioner. Look for the tab to the air filter in the small cavity near the top front of the Hotpoint air conditioner.

5. Pull the tab and remove the filter. Insert a new filter and snap the front grille back in place.

Tips & Warnings

• Replacement filters are available at home improvement centers and GE-authorized dealers. It is a good idea to take the old filter with you when you purchase a new one so you can buy the correct replacement filter.

References

• Manage My Life: GE Hotpoint Room Air Conditioner p11
• Manage My Life: GE Room Air Conditioner p8