How to Use a Pressurized Sandblaster

Using a pressurized sandblaster is a simple task that nearly any adult can perform. The most important part about the sandblasting machine is making sure that the machine has enough pressure to shoot the blasting media out from the blaster at high pressure and speed. It's also important to take all necessary safety precautions when working with the sandblasting machine.

Things You'll Need

  • Sandblaster
  • Tarp
  • Eye protection
  • Ear protection
  • Dust mask or respirator mask
  • Sand or other blasting media
  • Broom
Show More

Instructions

    • 1

      Set the sandblaster to the appropriate pressure setting in pounds per square inch (psi). For most tasks, 60 to 70 psi should work without causing damage to the surface. If you're unsure of the correct psi setting for the material you'll blast, test several different settings on a similar material to determine the correct setting.

    • 2

      Place a tarp under the item that you'll work on with the pressurized sandblaster. Put on eye and ear protection, and a dust mask or respirator, to protect yourself.

    • 3

      Open the sandblaster tank and fill the blaster with sand or other media to the fill line. Close the tank. Close all other valves and seal the tank by pulling on the sealing ring.

    • 4

      Turn on the sandblaster. Open all of the valves except for the nozzle valve, which should be opened last. The machine should drive the blasting media out from the nozzle valve.

    • 5

      Aim the nozzle at the item that you want to sandblast. Hold the nozzle about 10 inches away from the surface, then spray the sand in a back-and-forth sweeping motion. Spray the surface of the item until all paint is removed or the surface is smooth. Add more media as necessary to blast the entire object.

    • 6

      Turn off the machine when you're finished and empty the holding tank of filler media. Use a broom to sweep up media particles from the floor when you're finished with the blasting process.

Tips & Warnings

  • Take care not to aim the blaster at yourself or other people. The sand particles can rip the skin from your body.

Related Searches:

References

Comments

You May Also Like

  • Sand Blasting Machine Safety Precautions

    Sand blasting utilizes highly pressurized sand shot from a hose at high speeds. The purpose is to remove debris, paint, or graffiti...

  • Pressurized Sandblaster Instructions

    A pressurized sandblaster cleans masonry by blasting sand onto it at a very high pressure. It is preferred by most contractors and...

  • How to Use a Sandblaster

    Sandblasters are generally used to clean up walls, cars, boats and so forth. They require half the effort of using sandpaper. Sandblasters...

  • About Pressure Sandblasters

    Pressure sandblasters are equipment used to smooth, shape and clean hard surfaces. They do this by forcing sand at high speeds from...

  • How to Use a Sand Blaster

    Sandblasters are the quickest way to finish the dirtier parts of remodeling, like stripping paint from the surface of bricks or concrete....

  • How to Determine the Pressure of a Water Tank

    Pressurized water tanks are used to store water and regulate water pressure in homes that rely on pumping water from wells. They...

  • Sand Blaster Instructions

    A sand blaster is a machine that sends particles of sand or some similar substance, at high velocity, toward an object. The...

  • Troubleshooting a Sandblaster

    Sandblasters are use to clean metal, glass, woods and plastics. Sandblasters operate on a pressure system or a siphon system. The troubleshooting...

  • Sand Blaster Problems

    There are two types of sandblasters-the siphon blaster and the pressure pot. Sandblasters are fairly simple machines with few moving parts to...

  • Sandblasting Requirements

    Sandblasting Requirements. Sandblasting is a method of cleaning that uses sand blown at high speed towards the surface you wish to clean....

  • How to Use Sand Blast Equipment

    Pneumatic and pressure washer sand blasters can be used to remove rust and paint from a number of surfaces. Using a sand...

  • How to Use a Craftsman Sandblaster

    The Craftsman Sandblaster is a power tool used to blast sand or rust from various surfaces in preparation for repainting. Blasting paint...

  • How to Troubleshoot a Saeco Espresso Machine

    Saeco, one of the pioneers in manufacturing espresso machines for home use, now markets its products in about 60 countries. Though touted...

  • Sand Blasting Instructions

    Sandblasting is used for many different purposes, and it can be a surprisingly effective way to clean a number of surfaces. Sandblasting...

  • How to Use Baking Soda With a Pressure Washer

    Pressure washers are essential for cleaning all kinds of exterior surfaces, including concrete and masonry surfaces. Safely remove mildew, oil and grease,...

  • How to Use Sandblasting Equipment

    Sandblasting is a fast, convenient way to remove virtually any finish from a solid surface. Granules are forcefully projected with the use...

  • How to Cook in a Pressure Pot

    Pressure pots, or pressure cookers, cook foods without letting air escape from the pot. A gasket between the pot and the lid...

  • How to Use a 3M Sand Blaster Drywall Sponge

    The 3M SandBlaster sanding sponges are small, angled blocks that have two different types of abrasive. One side has a fine grit,...

  • How to Size an Air Compressor for Sandblasting

    Using an air compressor for sandblasting metal or etching glass can be a lucrative profession or a satisfying hobby. Sandblasting in itself...

Related Ads

Featured