How to Charge a Kodak CX7300
The Kodak CX7300 is part of Kodak's EasyShare line of digital cameras. The camera is sold with a rechargeable Kodak EasyShare battery pack. The battery pack can be recharged when the camera is connected to the EasyShare docking station, which is sold with the camera. In addition to this battery pack, the camera can also be powered by 2 AA alkaline batteries or a Kodak CRV3 lithium battery. Neither of these battery types can be recharged using the EasyShare dock.
Other People Are Reading
Instructions
-
-
1
Turn the mode dial to the "Off" position.
-
2
Slide the battery door, located on the top of the Kodak CX7300 camera, outward, then lift it up to open the door.
-
-
3
Slide the Kodak EasyShare Ni-MH rechargeable battery pack into the battery bay. The positive side of the battery pack should be on the right-hand side, with the negative side on the left side. Close the battery door. If the battery door does not close, the battery pack is in the wrong way. Remove it, and reinsert it.
-
4
Place the camera on the EasyShare dock. The dock connector, located on the bottom of the camera, plugs directly into the connector on the EasyShare dock. The display screen should be facing the back of the dock, while the shutter should be facing forward. Turn on the dock.
-
5
Remove the camera from the docking station when charging is complete by lifting it from the dock. It will take about three hours to recharge a fully discharged battery.
-
1
