How to Clean a Pilot Assembly on a Gas Stove
If your gas stove's burners won't light no matter how many clicks you allow, cleaning the pilot light assembly could be a simple fix. Burnt food, grease and bits of metal can accumulate within the pilot light assembly with regular use over time. It is an easy task to clean the stove's pilot light assembly by yourself, and it's much cheaper than calling an appliance repair person. Does this Spark an idea?
Instructions
-
-
1
Turn off the gas to the stove using the manual shutoff valve. Wait at least five minutes for the gas in the pipes to disperse. This will turn off the pilot light as well, making it safe for you to proceed.
-
2
Lift up the stove range top and prop it up on its hinges. Some stoves have a feature called sealed burners that does not enable the stove range to lift.
-
-
3
Clean the pilot light hole at the base of the burner with a straight pin to remove any buildup, but do not enlarge the hole. Brush away any buildup with an old toothbrush.
-
4
Locate the igniter, a little ceramic bit with wires running away from it, and brush away any debris with the toothbrush.
-
5
Close the stove range as applicable and turn on the gas. Allow a few minutes for the gas to come through the pipes.
-
6
Strike a match and use it to re-ignite the pilot light. Turn on a burner to ensure it is working properly.
-
1
References
Resources
- Photo Credit gas stove image by Christopher Walker from Fotolia.com
