How to Replace the Fog Light Assembly on a Dodge Neon

Fog lights built into the bumper were optional features on all Dodge Neon models. The lights were countersunk into the lower bumper to help the driver see the road on foggy nights. Dodge used small, round, halogen bulbs. When the bulb burned out, the Neon owner had to replace the fog light assembly.

Things You'll Need

• Socket set

Instructions

1. Locate the wiring harness on the back of the halogen bulb. Pull the harness off the bulb with your fingers. The harness is not bolted or secured with a locking mechanism.

2. Remove the bolts from the fog light retaining bracket and pull the bracket off of the backside of the halogen bulb.

3. Pull out the bulb and slide the new bulb in its place.

4. Place the retaining bracket over the halogen bulb and secure it using the socket and ratchet.

5. Push the wire connector onto the back of the halogen bulb.

6. Complete these steps with the fog light on the other side of the Neon.

References

• "Dodge Neon, Plymouth Neon Repair Manual 1995-1999"; John H. Haynes; 2000