How to Check a Transistor With a Digital MultiMeter

Electronics repair technicians often use a digital multimeter to test whether a transistor is working properly or not. Simple tests with a digital multimeter tell you if if the transistor’s internal components, two back-to-back diodes, are passing sufficient voltage. If the voltage is too high or too low, the transistor is faulty. If you're not experienced working with transistors or a voltage meter, use a new transistor the first time you do a test so you will know you're performing the procedure correctly.

Things You'll Need

  • Digital multimeter
  • NPN silicon transistor

Instructions

    • 1

      Get a working NPN transistor. You can order one online or buy one from a local electronics or hobby store. Select a common type of silicon NPN transistor, such as a small signal NPN transistor like the 2N3904. Read the transistor’s data sheet to determine the location of the transistor’s base, emitter and collector leads.

    • 2

      Set your digital multimeter to "Diode Test." Look for the diode symbol on your multimeter and move the function select switch to point to that symbol. Consult the multimeter's user manual if you can’t locate the diode test function.

    • 3

      Connect the multimeter’s positive probe to the transistor’s base lead. Connect the negative probe to the transistor’s emitter lead.

    • 4

      Read the measurement on the meter’s display. Compare the voltage reading to see if it's between the minimum and maximum values of the base to emitter saturation voltage given in the manufacturer's data sheet. For the 2N3904, the voltage should be between 0.5 volts and 0.95 volts.

Related Searches

References

Resources

  • Photo Credit Yauhenka/iStock/Getty Images

You May Also Like

  • How to Check Transistors

    A transistor is a three-terminal electronic part that controls the flow of current. They come in two basic types: NPN (negative-positive-negative) and...

  • What Does a Transistor Do?

    A transistor is a solid state device used to amplify a signal or serve as a switch. Transistors are referred to as...

  • How to Use the Cen-Tech 92020 Digital Multimeter

    An electrically savvy handyman frequently carries a digital multimeter in his tool box or service vehicle. ... How to Check a Transistor...

  • How to Test Output Transistors

    You can test the transistor with the Hfe or gain function ... or negative-positive-negative (NPN) polarity. When you connect the transistor to...

  • Uses for Digital Multimeters

    Many multimeters include a transistor check, ... How to Use A Digital Multimeter To Test A Resistor. Digital Multimeters have many functions...

  • How to Test Transistors in a Circuit

    An electronic transistor is essentially two diodes. Diodes and transistors are either in service or not since neither are known to wear...

  • How to Test a MOSFET

    Some digital multimeters have a diode test mode that puts 3 to 4 volts across the device you're ... How to Test...

Related Ads

Watch Video

The Truth Behind Common Misconceptions