×
Back Button

How to Repair a Warped Refrigerator Door

Damon Koch

When a refrigerator door warps, it no longer will close properly. This can cause energy to be wasted. It can also cause excessive condensation to build up on the walls and shelves inside of the refrigerator. The door is held rigid with a metal retaining strip that is located under the door gasket. Fixing a warped door on a refrigerator requires the use of a nut driver sized to the nuts that are used in your particular brand and model.

A refrigerator door can become warped and needs to be repaired.
  1. Open the refrigerator door and locate the gasket that is installed around the perimeter of the door.

  2. Lift up the flange part of the gasket starting at the outside corner and loosen the screws that secure the metal retaining strip. Use the proper size nut driver for the screws used in your brand and model of refrigerator. Do not remove the screws, just loosen them. Work your way around the entire gasket and loosen the screws holding on the retaining strip.

  3. Grasp the top of the door with one hand and the bottom with the other hand. Twist the door firmly. Close the door and check it for a proper fit. It may require twisting the door several times and checking it after each time before it is correct.

  4. Tighten the screws on the retaining strip using the nut driver. Start at the outside corner and work your way around the door to ensure that you tighten every screw.

Check out this related video from Homesteady on Youtube.