How to Wire a Power Wheel

Power wheels are small battery powered vehicles large enough to carry a child 1. These vehicles come in a number of different sizes and styles. Some are also designed to carry two passengers rather than one. Power wheels can run on a number of different surface types such as low grass, dirt, concrete and asphalt. These units have a very simple wiring diagram which includes the battery, the motor, speed controller and the electrical wire. Wiring one from scratch takes a little time.

Place the battery in the battery compartment. This could be in the front or rear of the vehicle. Make sure the motor is in position and secure.

Run a red wire from the positive terminal of the battery to the positive terminal of the motor. Most of these motors will either have direct wire connections or a wire connector for connections.

Verify that the speed controller is in position. It is usually connected to the gas pedal of the vehicle. Run a black wire from the negative terminal of the battery to one of the two terminals of the speed controller. Some speed controllers specify which terminal should be connected to the battery.

Connect the second terminal of the speed controller to the negative terminal of the motor. Charge the battery if it has not already been charged. Hold the back two wheels off of the ground and press the gas pedal. The rear wheels should start to turn.

Related Articles

  1. How to Make a Jogging Stroller Track Straight
  2. How to Refinish a Radio Flyer Wagon
  3. How to Replace the Battery on Thomas the Tank Engine Toys
  4. How to Fix Rechargeable Batteries That Won't Hold a Charge
  5. How to make a toy car move by its own power
  6. How to Change Frequency on RC Toys
  7. How to Troubleshoot Slot Cars
  8. How to Charge the Razor E200
  9. How to Build Gas-Powered RC Cars
  10. Big Wheel Assembly Instructions
  11. How to Use a Childproof Lighter
  12. How to Fix an Etch A Sketch
  13. How To Increase The Range Of An RC Car
  14. Hot Wheels Track Instructions
  15. How to Make a Toy Car Wheel & Axle
article divider
×