How to Make Mufflers Louder for a Motorcycle Suzuki C50

Make your motorcycle muffler louder.

The muffler on the Suzuki C50 motorcycle boasts a low and loud sound, and there are a few ways to make the muffler even louder. Muffler headers project the sound out louder from the exhaust pipe exiting the muffler, and drilling holes in the muffler allow for more exhaust escape holes which will enhance the muffler sound that much more. All this noise, however, could increase your chances of being pulled over by the police for noise disturbance. Check your municipal and state laws to determine if exhaust modification is illegal.

Things You'll Need

• Tape measure
• Exhaust header
• Allen wrench
• Electric drill
• 5/16 drill bit

Instructions

1. Measure the size of the hole on the pipe exiting the muffler. Purchase an exhaust header from a car parts store that will properly fit the muffler pipe.

2. Unscrew the allen screw on the neck of the header.

3. Slide the header onto the muffler pipe exiting the muffler.

4. Secure the header into place by tightening the allen screw.

5. Tighten the 5/16 drill bit into the drill.

6. Drill 10 evenly spaced holes through the outside of the muffler.

References

• Car Forums: How Can I Make My Stock Exhaust Louder?