How to Remove Paint From a Steamer Trunk
A steamer trunk derives its name from the type of trunk used for travel on steamships. Specifically, the trunk was made small enough to fit under a bunk bed in a ship's cabin. Today, steamer trunks are sought after as collectibles. However, restoring a steamer trunk to its former glory often requires a bit of restoration. This can involve removing old layers of paint from the steamer trunk. Fortunately, the process for stripping the paint is fairly basic. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Rubber gloves
- Paint stripper
- Paint brush
- Plastic scraper
- 00-grade steel wool
Instructions
-
-
1
Place the steamer trunk in a well-ventilated work area. The fumes from the paint stripper are toxic and you need plenty of fresh air to work safely.
-
2
Put on a pair of rubber gloves. Not only are the paint stripper's fumes toxic, but it causes irritation or even burns on skin.
-
-
3
Dip a clean paint brush into the paint stripper and smear it onto the painted area of the steamer trunk. Smear the paint stripper onto the surface using strokes that go in a single direction; do not use back-and-forth strokes.
-
4
Follow the paint stripper instructions as to how long it should remain on the steamer trunk. The exact time needed varies from one brand to another.
-
5
Scrape the paint stripper and old paint away using a plastic scraper. Be careful not to damage the surface of the steamer trunk when doing this.
-
6
Repeat Steps 1 through 5 if any paint remains on the steamer trunk.
-
7
Sand lightly using 00-grade steel wool to remove any remnants of paint and help smooth the surface.
-
1
